When it comes to laser engraving cylinder, there are several things that you must get right. Getting the setting of both the machine and the work-piece are two things that you need to consider. If you are planning to start laser engraving for the first time, it can be a little bit tricky. Sometimes, using the laser engraving user manual may not provide you with the details you need to know.

For laser engraving cylinder process, we have put together a couple of things that you need to put into consideration to do it right. Here is everything that you need know about laser engraving cylinder:

Move The Cramp Down And Switch Of The Laser

One of the first things that you need to do is to prepare the laser unit for the task. There are two things that you need to put into consideration. One of them is the possibility of the cramp or the laser table. Then you need to move it down to the lowest level possible. This will help create enough space for placing of the gravure printing cylinder. The second thing you should do get the machine ready for the placement of the gravure cylinder is switching off the unit.

Detach the Nozzle

For the safety purpose of the machine, you need to detach the laser nozzle before you can start with the placing of the gravure printing cylinder. These nozzles are very delicate and would get damaged if they are by the heavy cylinder. That’s why it is recommended that you detach the nozzle first. Manufacturers such as the Laser Engraving manufacturers have their machine designed with easily removable laser nozzles. This ensures that the safety of the unit is maintained.

Insert the Cylinder

With the laser engraving machine ready, the next thing should be inserting the gravure printing cylinder. This should be difficult because it is all manual. However, you will need skills to ensure that you are placing the cylinder right. Then hold it in place using the cramps on both sides. Depending on the model of the laser engraving machines, you have plenty of options to select from.

Laser engrave

With the gravure printing cylinder set in the machine, the next thing should be doing the actual engraving. That’s pretty easy because you just need to turn on the machine. The laser engraving machine will rotate the cylinder to zero degrees for reset. If you have the graphic ready on the computer, just click engrave. That’s how you do it